Wheel Balancer 40mm X 4mm Shaft Complete Manual Wing Hub Nut Kit/Set – Fits Accuturn, Cemb, Coats 775, 875, 1175, XR Series, FMC, Hofmann, John Bean JBC – 61072 – Made in USA | Package and Ordering Details

Name: Wheel Balancer 40mm X 4mm Shaft Complete Manual Wing Hub Nut Kit/Set - Fits Accuturn, Cemb, Coats 775, 875, 1175, XR Series, FMC, Hofmann, John Bean JBC - 61072 - Made in USA | Package and Ordering Details
SKU: D-B07VNH38BZ
Price: 230.43 USD
Availability: InStock

$230.43

SKU: D-B07VNH38BZ Category: Wheel Alignment & Balancing Tools

Confirm quantity, package contents, selected variation, current offer details, and store terms before placing the order.

NOTE: YOU MUST CHECK THE SHAFT THREAD PITCH TO SEE IF YOU HAVE A 3MM OR 4MM BEFORE ORDERING
Will fit all model balancers with 40mm X 4mm thread pitch shafts (approximately 7 threads per inch)
KIT CONTAINS: Wing Nut, Pressure Cup & Rubber Ring
Fits all of the following wheel balancer models with a 40mm X 4mm thread pitch shaft: Accuturn: 1200,1220, 1250, 1400, 1420, 1450, 1500, 1520, 1550, 1650,1820 & 1850, Bosch: All Models, Cemb: All models with a 40mm diameter shaft, 1995 & later, Coats: 775, 875, 1175, XR Series
FMC / John Bean: All Models with a 40mm shaft, HOFMANN: All models with a 40mm diameter shaft, Kwik Way: 402, 571, HS, 572, 574, 576, 578, Launch: 408, 500, SNAP-ON: All models with 40mm shaft
MADE IN USA!

Before you order

Confirm the part number, position, dimensions, and connector details shown on this page.
Compare the listing with the part currently installed on your vehicle.

Description

Confirm the selected variation, quantity, package contents, current offer, and store terms before placing an order.

OEM Style Replacement Wing Nut for 40mm X 4mm Thread Pitch Shafts. Will fit all model balancers with 40mm X 4mm thread pitch shafts. To check, measure the diameter (40mm) and the thread spacing (4mm) on your balancer shaft. Thread spacing is the distance of one thread and one space; for example, the distance from the left edge of a thread to the left edge of the next thread. NOTE: YOU MUST CHECK THE SHAFT THREAD PITCH TO SEE IF YOU HAVE A 3MM OR 4MM BEFORE ORDERING

Product facts

Specifications

Canonical product: MP-US-B07VNH38BZ
Source product ID: B07VNH38BZ
Category: Tools & Equipment / Tire & Wheel Tools / Wheel Alignment & Balancing Tools
Available images: 2

Vehicle information

Available fitment details

Listing compatibility notes

Will fit all model balancers with 40mm X 4mm thread pitch shafts.

Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.

Package contents, delivery, returns, inventory, and buying trust

Buying guidance

Quick decision

Check exactly what this wheel alignment & balancing tools listing includes before checkout.

Package contents

Use the photos and product description to confirm quantity, sides, hardware, and included accessories.
Review the current shipping and returns pages before ordering.

Before you buy

Compare the listing title, photos, package contents, and specifications with the part being replaced.
Confirm vehicle compatibility and installation requirements before ordering.

Delivery and returns

Use the current cart, checkout, shipping, and returns pages for store-specific terms.
Keep the selected variation and order details available for support.

Customer feedback

Ratings and written reviews

Reviews below were submitted through this store.

Reviews

There are no reviews yet.

Be the first to review “Wheel Balancer 40mm X 4mm Shaft Complete Manual Wing Hub Nut Kit/Set – Fits Accuturn, Cemb, Coats 775, 875, 1175, XR Series, FMC, Hofmann, John Bean JBC – 61072 – Made in USA | Package and Ordering Details”