Tazer Mini Programmer JL JT Calibration Module, Compatible with2018-2024 Jeep Wrangler JL 4XE and Gladiator JT -Change Tire Size, Gear Ratio, TPMS, Over 65 Settings | Package and Ordering Details
$135.99
Rated 2.5 out of 5 based on 2 customer ratings
2 ratingsSource: Amazon
Confirm quantity, package contents, selected variation, current offer details, and store terms before placing the order.
About this item
- High Performance: If you need comprehensive vehicle tuning capabilities, want to boost your vehicle’s performance, perform off-road configurations, or need more customization options, this Mini Programmer is a good choice
- Auto Stop Start Disable: If you have a Jeep Wrangler JL or Gladiator JT with Auto StopStart, you may find it annoying and want it to default OFF. Mini Programmer can set the startup drive mode for you, so you don’t need to switch modes every time you get in the car
- Enable/Disable TPMS: In addition to enabling or disabling the TPMS system, Mini Programmer also allow users to adjust the pressure threshold for TPMS alarms. This is useful for users who want to operate at different tire pressures. There are also functions to adjust tire size, axle gear ratio, daytime running light mode, etc
- Off-road Mode Setting: Provides a variety of off-road mode options to optimize the vehicle’s performance in different terrains. Includes manually control the anti-roll bar, manually control the front and rear axle differential locks at any speed to adapt to various off-road challenges
- Compatible Vehicle: The Mini Programmer is an electronic plugin device for the following vehicles: 2018-2024 Jeep Wrangler JL, 2020-2024 Jeep Gladiator JT, 2021-2024 Jeep Wrangler 4XE. Meets most usage requirements, no update module.
Before you order
- Confirm the part number, position, dimensions, and connector details shown on this page.
- Compare the listing with the part currently installed on your vehicle.
Wesley –
Some things it worked for, like letting me set tire size but a few things were glitchy. I know this is cheaper than the brand name item so I assumed it might not be as nice, but still expected it to work for the menu options it hasFlashing 3rd brake light has issue where you can’t change number of flashes. Line lock stops work about 2 seconds after you apply the gas.
Customer –
I just want to confirm to potential buyers this product works as intended on a JEEP Wrangler Rubicon 2020. I do not believe it has the PIN code option the original Tazer mini JL has, for those who want to secure your car having to enter a button key combination on the steering wheel to be able to drive away (you are also not able to update the firmware on this unit).TIP: Once you succeed to install it it, you can do whatever changes you need BUT you will have to do two full reboots (as explained in the manual) for it to be fully accepted by the CAN bus system. If you don’t a big red dot will shine on the tachometer panel. What is IMPORTANT to know is that, once you start the reboot sequence it will countdown to 0, but it will do so at least 2 times before doing the full reboot (the first countdown longer than the second). So do not think it has done a reboot after the first count, be patient. If you do it correctly the light will stop shining 🙂