Description
Confirm the selected variation, quantity, package contents, current offer, and store terms before placing an order.
Mobile Refinish Clear Coat High Gloss Super Fast Clearcoat Gallon Kit SMR-105/75 SMR-105, Speedo N.R. clearcoat utilizes new resin technology which allows for an extremely fast cure while maintaining an ultra high gloss. SMR-105 is easy to apply and can be BUFFED in 45 MINUTES, yielding a DOI equal to an overnight dry clear. This sale is for a gallon of SMR-105 clear coat and a quart of SMR-75 medium speed (65-80°F) activator; which yields 5 quarts sprayable. Note: Apply 2-3 coats of SMR-105 all at once without a flash in-between coats until the desired gloss level. Usually 2-3 medium coats is plenty of clear. SMR-105 is National Rule voc, Not for sale in California, Delaware or Maryland. For these states buy SMR-100.
No structured vehicle fitment data is available. Compare the listing with the vehicle and existing part before ordering.
Package contents, delivery, returns, inventory, and buying trust
Buying guidance
Quick decision
Check exactly what this clear coats listing includes before checkout.
Package contents
- Use the photos and product description to confirm quantity, sides, hardware, and included accessories.
- Review the current shipping and returns pages before ordering.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Delivery and returns
- Use the current cart, checkout, shipping, and returns pages for store-specific terms.
- Keep the selected variation and order details available for support.
Customer feedback
Ratings and written reviews
4.3 / 5
81 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Mg –
I have be doing custom painting since the 70s. one thing I have learned in all that time is, trying new things is a good thing. I must admit, I didn’t have very high expectations when it comes to this clear, or the Speedo kote color blender. Lets be honest, comparing a 99$ super fast clear to High solids clears that coast 3 or 4 times as much, isn’t exactly fare. Fare or not I am going to do it. Lets start with the color blender, My local supplier charges 75$ for a quart of PPG color blender, I use color blenders for mixing candy concentrates, and as the carrier for metal flake. Speedo Kote’s color blender worked quite well for both of these uses. The candies I shot using it, atomized vey well and laid down very flat, both shot from a HVLP gun set up with a 1.3 mm needle setup at 35 psi at the gun, and through a large needle airbrush. I saw no adhesion issues when pulling tape. When used to shoot flake, through a Binks Model 7 setup with a 1.8 mm needle set, again it atomized well, I use color blender for shooting flake because it dries fast. This color blender worked just fine, gave me enough time to rub the flake down flat, before it became to hard.It would be safe to say I really didn’t miss the 75$ PPG color blender. As to the super fast clear coat. I used it to bury the flake, and provide the final clear coat. This is where I fully expected to be let down by this product line. However, I was actually shocked, to see how well this clear laid down. I shot it with a 1.3 mm needle HVLP gun at 35 PSI at the gun. It went on so flat, I couldn’t believe that a clear that can be touched in 10 minuets, could lay so smooth! It wet sanded with ease, and polished to a beautiful gloss. All I needed to do was hit the project with 2000 grit on a block to make it ready to polish. Side by side with something clear coated with an expensive high solids clear, it would be very difficult for anyone to pick out the expensive clear! If you were doing a plain old repair job on a car, you wouldn’t have to wet sand at all, just skip right to the end, that equals money in your pocket! So to sum up, am I saying I am giving up expensive clears and color blenders, well no. The work I do is high end custom work, and my customers are well informed, and expect to pay more for premium materials. However, there are always those budgetminded customers, looking for an amazing paint job, without breaking the bank. As for me, I would not hesitate to offer these products as a lower coast alternative to the much higher priced options. And I would do it with confidence in the finished result that I would be delivering!
Alex –
I am very impressed with the product. It lays down nice and even -very little orange peel. Hardens for sanding in 2 hours. I really like it!
Levi A Little –
It dry’s very quickly which is nice since you don’t have to wait to do another coat.
Customer –
The media could not be loaded.
Carlos M Contreras –
This clear works great I use it to paint bikes guitars cars models you name it I use it!! You could see the clear in the pics I uploaded
Customer –
Great product, good price, and quick shipping. I’m not a pro but it’s the best clear that I have used.
Angel Black –
MECHAS AUTO BODY LLC…Is an amazing clear I know it’s for spots or some lil parts but, I tell you what I have paint more than one part and is super shiny.
D –
Three coats is best for a deeper finish. 80% overlap for the smoothest finish. Yet the DOI (clarity or reflection) is a bit blurry compared to their euro clear or SMR 42. Best to use this on non reflective colors like white, beige or yellow. Dark colors will show a quality difference next to the panels that were not damaged.