Description
Confirm the selected variation, quantity, package contents, current offer, and store terms before placing an order.
- Product Dimensions
:
2.7 x 1.32 x 0.55 inches; 1.41 ounces - Item model number
:
RL-HM016R - Batteries
:
1 Lithium Metal batteries required. (included) - Date First Available
:
May 8, 2023 - Manufacturer
:
Ningbo Jiangbei Run Leader Electronics Co., Ltd - ASIN
:
B0C4KZWHMV - Best Sellers Rank: #1,023,739 in Automotive (See Top 100 in Automotive)
- #425 in Automotive Tachometers
Product description
For more than 10 years, Runleader has focused on product development and manufacturing in the fields of hour meter, battery indicator, multi-function meter, controller,service for the garden machinery industry, outdoor power vehicle equipment, transportation vehicles, such as: generators, pumps,chainsaws,outboards,lawn mowers,compressors and others,provide well-known European and American customers with quality products and services.
- RL-HM016R is a LCD digital hours tachometer contains functions of hours tracking,RPM monitoring.
- It made by 100% epoxy resin with strong water resistance which can keep good working condition upon underwater 10 meters up to rate IP68.
- Include built-in CR2050 battery with durable battery lifetime.
Runleader RL-HM016R Digital LCD Hour Meter Tachometer,Gas Engine Inductive Pickup,Waterproof Design.
1. Product Features
- REAL-TIME RPM: Display real-time engine RPM value when it running, with multiple engine firing pattern can be programmed to calibrate the accuracy.
- TOT Hours: Display total running hours when it off, avaliable viewable hours recording during single running period.
√ TOT Hours range: 0 to 99,999 hours.
√ RPM range: 0 to 30,000 RPM.
2. Main points
- √ Inductive engine signal pickup.
- √ Programmable engine firing patterns.
- √ Strong water resistance.
Runleader has established a complete laboratory for testing and improving the product’s quality
Buttons Testing
The buttons can works well after 10,000 repeated taps with a 300g weight.
High Pressure Washer Testing
Display with PC transparent board can keep it away from the damp or moist.
It also prevent the strong shock when it is cleaning.
High & Low temperature Testing
It can works well in temperature environments temperature: -40 °C – +70 °C.
Drop Testing
Favorable anti-vibration performance can suffer strong vibrations when the equipments is working.
Anti-vibration Testing
It can keep the housing and LCD display window in good condition upon vibration amplitude 1.52mm after 6 hours testing period.
Anti-interference Testing
It keep good working condition upon static interference test. It also pass another considerate test for each functions sections and attached accessories.
R.L.K. –
There’s not much to say because it just worked, perfectly. Default setting is 4-cycle and that’s what I put it on so I just followed the minimal instructions on the back. Three wraps around the high voltage SP lead and two passes through the holes on the side of the tach. Started the engine and there it was.I have an old ride-on that I re-engined. The carb linkage is backwards from the old one so full choke is where the speed is marked “slow” and slow is where the speed is marked “choke”. Well actually “turtle emoji” and “rabbit emoji”. If I want full engine speed with no partial choke(wasting fuel), I have to get actual “rabbit” which is now about 2/3 of the way between fast and slow, coming from the slow “rabbit emoji” side of the throttle travel. Sounds confusing but it isn’t. I always did it by ear but now I can actually see the maximum and back off 100rpm and I know it’s not riding the choke.Searching for a down side, the only thing I would change about it is to make and include a snap-on holder (bracket) and put the double sided foam tape on it instead of the tach itself, so that it would be easily removable to use temporarily somewhere else (like chain saw/weed trimmer/etc. tune-ups) rather than directly on the back of the device. I addressed that issue by only removing about a 3-4mm strip of the protective paper on the adhesive tape and leaving the rest so it can be used again should I need to take it off and put it on again.
Jacob Wilson –
I got this to use on my gas-powered pressure washer to keep track of maintenance items. It’s very compact and displays the necessary information needed to keep up with general maintenance like spark plugs and oil/filters. It’s pretty easy to install. For removability, I mount the device with an adhesive hook & and loop tape. to make sure it doesn’t go anywhere should the tape fail, I also utilize a zip tie. For the sensing wire, I wrap it around the spark plug wire five or six times and then cover the wraps with a piece of duct tape to keep them tight around the wire.Simple as that! Never be left guessing about when your next oil change is due.
Adam Kielsmeier –
Unit is built solidly and has adequate instructions. I bought it to adjust idle and full throttle rpm on chainsaws, as it is advertised as reading to 30,ooo rpm. It worked well for setting idle but wouldn’t read above around 65oo rpm, so no good for setting high limit on my saws.
Jay –
Works as advertised would recommend.
jos –
facile a installer