Description
Confirm the selected variation, quantity, package contents, current offer, and store terms before placing an order.
Fits bearing with 12-25 mm i.d. and 32-47 mm o.d..
Adapters can be changed quickly to accommodate a wide range of bearing combinations.
Durable steel handle and anodized aluminum drivers.
Can be used with a hammer or shop press.
Laser etched adapters for easy identification.
Comes with protective blow molded case.
Vehicle information
Available fitment details
Listing compatibility notes
- About this item Fits bearing with 12-25 mm I.
- Fits bearing with 12-25 mm i.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Package contents, delivery, returns, inventory, and buying trust
Buying guidance
Quick decision
Check exactly what this tool kits listing includes before checkout.
Package contents
- Use the photos and product description to confirm quantity, sides, hardware, and included accessories.
- Review the current shipping and returns pages before ordering.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Delivery and returns
- Use the current cart, checkout, shipping, and returns pages for store-specific terms.
- Keep the selected variation and order details available for support.
Customer feedback
Ratings and written reviews
4.6 / 5
138 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
scott –
there very small so it,you should really look close at sizes so my bad
Dantrax –
Check your bearing hole and diameter sizes first. There are No included directions. If you look at the picture the screw goes up through one of the five bearing hole sizes and through the correct diameter size cup and into the handle. Then flip it over and put your bearing on top of the bearing holder. I had to screw the 17mm into the 40mm cup to tap the front wheel bearings in. Then I screwed the 20mm into the 47mm cup to tap the rear bearings in. This tool holds the bearings aligned pretty well as you tap them into the wheels. Take your time and check the alignment after every tap as you drive the bearing into the wheel. Worked way better than trying to use the old bearing to drive in the new bearing. No side to side slipping or cocking of the new bearing this way. If you have bearings to install you should give this tool a try.
Customer –
handy tool
Brian ferryman –
Such a good product a little pricey I think but worth every penny very strong and helped me get the bearings out of my cases with ease would recommend to anyone looking for a good driver set
Demonio –
Good quality bearing driver kit from Motion Pro. Flawless purchase thank you.
Steve T –
The tool is simple to assemble and fits a variety of bearings that are common on motorcycles. I had a bearing to replace inside my engine case, and the tool allowed me to quickly install with a mallet. Another bearing needed to be pressed into a housing that could be put on the hydraulic press, and the tool worked perfectly in the press. It is hard to find bearing drivers that are not specifically designed for automotive wheel bearings. This tool was the perfect solution for my project.
Aaron Hansen –
Fast shipping, brand new. Item as described.
Customer –
Title says it all. Don’t cheap out and buy a tool that will damage your bearings. Pricey but worth it imo.
Steve gagne –
Super
Francesco Falsini –
Super good quality!
MikoLee –
I damaged multiple bearings trying to use the old socket method. I decided to just get this set and wow. It was so easy to set my bearings properly. I just wish it wasn’t so expensive, but for me it was worth it.