Description
Confirm the selected variation, quantity, package contents, current offer, and store terms before placing an order.
Quick decision
Check exactly what this step rails listing includes before checkout.
MaxMate 3′ Nerf Bars Compatible with 1999-2018 Chevy Silverado GMC Seirra 1500 2500 LD (Exclude SS) | Reg Cab | WB2C34607 | Side Step Rails Running Boards | Package and Ordering Details
$131.88
359 ratingsSource: AmazonConfirm quantity, package contents, selected variation, current offer details, and store terms before placing the order.
About this item
- [COMPATIBLE WITH] 1999-2018 Chevy Silverado / GMC Seirra 1500 2500 LD | Reg Cab [Cab Size Note: Only fit Regular Cab with 2 front doors. (See Image for more info)] | Not compatible for SS model | 2pcs with Mounting Bracket Kit
- [ELEGANT CURVED TUBE DESIGN] Captivating round tubes wraps along the contour of the pickup truck or SUV’s rocker panels for a stylish look. Curved design of these nerf bar side steps allows a wider profile for safer entering and exiting of your vehicle. Match perfectly with vehicles equipped with other chromed accessories.
- [POLISHED STAINLESS STEEL FINISH] 3 inch round tubes are made of heavy-duty polished stainless steel tubes that are rust and corrosion resistant. UV resistant non-slip wide step pads.
- [EASY INSTALLATION INFO] Comes with both driver and passenger side step bars. Includes all brackets and hardware needed. Steps are mounted onto the rocker panel. Installation can easily be done in 20 minutes. | No drilling required.
- [WARRANTY INFO] Limited 5 Year Warranty against manufacturer defect for US customers.
Product facts
Specifications
- Canonical product
- MP-US-B00MOKM53O
- Source product ID
- B00MOKM53O
- Category
- Exterior Accessories / Running Boards & Steps / Step Rails
- Available images
- 3
Vehicle information
Available fitment details
Listing compatibility notes
- About this item [COMPATIBLE WITH] 1999-2018 Chevy Silverado / GMC Seirra 1500 2500 LD | Reg Cab [Cab Size Note: Only fit Regular Cab with 2 front doors.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Customer feedback
Ratings and written reviews
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
10 reviews for MaxMate 3′ Nerf Bars Compatible with 1999-2018 Chevy Silverado GMC Seirra 1500 2500 LD (Exclude SS) | Reg Cab | WB2C34607 | Side Step Rails Running Boards | Package and Ordering Details
Related products
-
IAG V2 EZ-Step Add-On – Made in USA for Ford Bronco 2021+ w/rockrails (4 Door, Black Logo Plate, 2 Pair) (Does not fit Raptor or Sport) | Package and Ordering Details
$439.99 View details This product has multiple variants. The options may be chosen on the product page -
Bully AS-200 Polished Aluminum Universal Fit Truck Side Step Set of 2 for Trucks from Chevy (Chevrolet), Ford, Toyota, GMC, Dodge RAM, Jeep | Package and Ordering Details
$64.05 View details -
High Country 3-Step Mounting Block | Package and Ordering Details
$146.97 View details This product has multiple variants. The options may be chosen on the product page -
PIT66 Side Step Kit Production Compatible with Willys CJ2A CJ3A CJ3B M38 CJ5 Jeeps | Package and Ordering Details
$83.99 View details
Cowboot –
These sat in the box for a few days while I tried to determine how much time to devote to the installation. I checked YouTube for any helpful videos, but only found one video for this brand installed on a Ford F150……not all that helpful for my situation. Decided to tackle the job after dinner in the sweltering heat of the Florida summer evening. Set up a fan, got out the socket wrenches, and went to work. Turned out to be easier than I had imagined it would be.The directions were adequate…..barely. My 2009 Silverado 4×4 rides a bit high, so looking at the underside was easy enough. Although the mounting brackets are stamped, I matched each one with the directions and painted them with white lettering (RT FRT, LFT REAR, etc), laid them on the driveway under the appropriate mounting point, and got busy. While the directions indicate to begin on the passenger side, I ran into a glitch with the body mounts there (one was bent inwards preventing the mounting bracket from seating correctly – an issue not of the manufacturer’s making – I’ll address that tomorrow). I tightened everything back up and moved to the driver’s side.Edit To Add : The brackets that attach to the body mounts *will* make a popping noise at low speeds over small bumps as they hit against the body mounts that are welded onto the frame. Took the truck by the local dealership and talked to their body shop man, and he tells me it’s a common malady due to the location of the mounting point. GM steps mount differently, and they get no complaints. Aftermarket stuff, not so much. The cure ? Went to Home Debit, got some big 5/8″ washers and a few thin neoprene washers to make a home-brew spacer – just enough to put a 1/4″ or so between the body mount “biscuits” and the supplied brackets for these steps. Time will tell if my cure works or not. Your mileage may vary. Just be aware that this might become an issue after the install is complete.By now, I had a pretty good idea how this was supposed to go. Loosen body mount bolts, slide on bracket, tighten bolt part way. Once both brackets were loosely installed on the driver’s side, I propped the pretty chrome bar up with a piece of foam packing from the box to hold it in position as I screwed in the bolts that hold the bar to the brackets. While it might be helpful to have another pair of hands for that part of the install, it is certainly not necessary. Once the bolts and washers went into the bar, everything went quickly. Double checked the positioning of the brackets and the bar, tightened it all up, sat back and admired my new chrome step…..took all of about 15 minutes for one side.The quality seems good, the fit and finish are just fine for my needs. The price was right, with free shipping, and it’s a pretty easy DIY install….even at night, with only a pocket flashlight and a few hand tools. The only reason I gave it 4 stars instead of 5 was due to the directions. If you’re at all handy with a wrench, you can install these easily without a hoist or even a jack. GET SOME !
Martine –
tres bien et facile a installer
Juan Buentello –
Sturdy. Clean polished. Durable. Easy install. Instructions provide two variation silverado models. easy to understand. Fit perfectly. Plastic is durable as well. Recommend if your looking to make life easier entering and exiting truck. Makes the truck look like it was stock. Weight tested 175-190 and no noise, and no bent steps.
pappygo lucky –
Fit,construction,appearance are excellent. They mount to the cab mounts. Remove bolt install bracket, replace bolt. Install bars. I put these on a 2005 gmc 1500 standard cab 4×4 they look factory.
David Overstreet –
Very simple to install and they look great!
William D. –
I like the look and it took less than half the time it said it would take. Did it in 20 minutes with impact.
B –
The thickness of the pipes is thin! Thinner than my old ones made by Maar. They did not fit on my 02 and I had to cut and weld the brackets in order to make these fit. Really disappointed!…They do look great once installed but for the price they are not worth the hassle!
Wilson D. –
It’s good to know ,when you by a product that is supposed to fit and it’s perfect. No hassle no problem , looks great also great quality.
Brooke 2 –
Fast delivery very easy to install and they look great on my truck
Wobbly Centavo –
Provides added support and fully functional as a step to enter vehicle. The fit was perfect and easy to install. Heavy chrome, shiny and bright for a quality and really good look. For best shine and rust resistance, keep it waxed.