Skip to content
Clear product details Fitment guidance Contact support
PartsTrust Direct Know what arrives before you order.

CP4.2 Improved Stock Inlet Metering Valve Fuel System Saver Replacement for 2011-2016 Chevy Silverado/GMC Sierra 6.6 LML Duramax Diesel Replacement,Replace E05-10505 | Package and Ordering Details

$59.99

SKU: D-B0CR6JJX3L Category:

Confirm quantity, package contents, selected variation, current offer details, and store terms before placing the order.

  • Replacement For:2011-2016 Chevy Silverado,2011-2016 Gmc Sierra 6.6 Lml Duramax Diesel.
  • Replace OE Number:E05-10505, E05 10505.
  • Upgrade Design:The Original Screen Is A Single 80-Micron Layer, And Is A Very Flimsy Design. In Extreme Cases The Factory Screen Can Actually Tear, Introducing Massive Amounts Of Debris (From The Failed Pump) To The Injectors. The Fuel System Saver Valve Screen Is Rated At 25 Microns And Is Wrapped In Two Layers. This Improved Micron Rating And Double Wrap Construction Will Do A Much Better Job Of Keeping Debris From Entering The Rest Of The Fuel System.
  • High Quality:The Screen And Case Are Made Of Corrosion-Resistant Stainless Steel With Proper Deburring For Durability, High Cleanliness And Damage Resistance.
  • Customer Service:If You Have Any Questions, Please Feel Free To Contact Us By Email. We Will Give You A Reply Within 24 Hours Until You Are Satisfied.

Before you order
  • Confirm the part number, position, dimensions, and connector details shown on this page.
  • Compare the listing with the part currently installed on your vehicle.

Description

Confirm the selected variation, quantity, package contents, current offer, and store terms before placing an order.

The CP4 Pump on the LML model Duramax is prone for failure if the fuel system has any water or contaminated fuel introduced to it. When the pump fails, it will send metal contaminants throughout the entire fuel system which in most cases will ruin the injectors and other sensors and cost you several thousand dollars.

The System Saver Inlet Valve was designed to offer you the piece of mind in the event of a CP4 Pump failure. The important difference between the OEM valve and the System Saver is the improvement made to the screen, which is upstream of the valve inlet. The OEM screen is a single 80 micron layer, and is a very flimsy design. In extreme cases the factory screen can actually tear, introducing massive amounts of debris (from the failed pump) to the injectors. The System Saver Valve screen is rated at 25 microns and is wrapped in two layers. This improved micron rating and double wrap construction will do a much better job of keeping debris from entering the rest of the fuel system. It is also constructed in a manor where it will not be able to tear or de-laminate from the filter housing. Another benefit to the screen is the fact that it will load up quicker than the factory screen in the event of a pump failure. This will choke off the valve sooner, which will bring the truck out of service and shut it down in a shorter amount of time. This is all positive for improving the chances injectors wont need to be replaced when a pump has failed.has also flow tested the valve with the upgraded filter and there is no measurable loss of pump performance with the finer screen, even with a 10mm stroker CP4 pump at 4500 RPM. The screen and housing are constructed from stainless steel for corrosion resistance. And, as always, you can trust that products have been properly de-burred and are assembled using appropriate processes to ensure proper cleanliness.

Product facts

Specifications

Canonical product
MP-US-B0CR6JJX3L
Source product ID
B0CR6JJX3L
Category
Replacement Parts / Fuel System / Fuel Injection / Metering Parts
Available images
5
Referenced part numbers
E05-10505

Vehicle information

Available fitment details

Listing compatibility notes

  • Another benefit to the screen is the fact that it will load up quicker than the factory screen in the event of a pump failure.

Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.

Package contents, delivery, returns, inventory, and buying trust

Buying guidance

Quick decision

Check exactly what this metering parts listing includes before checkout.

Package contents

  • Use the photos and product description to confirm quantity, sides, hardware, and included accessories.
  • Review the current shipping and returns pages before ordering.

Before you buy

  • Verify the referenced part number: E05-10505.
  • Compare the listing title, photos, package contents, and specifications with the part being replaced.
  • Confirm vehicle compatibility and installation requirements before ordering.

Delivery and returns

  • Use the current cart, checkout, shipping, and returns pages for store-specific terms.
  • Keep the selected variation and order details available for support.

Customer feedback

Ratings and written reviews

Reviews below were submitted through this store.

Reviews

There are no reviews yet.

Be the first to review “CP4.2 Improved Stock Inlet Metering Valve Fuel System Saver Replacement for 2011-2016 Chevy Silverado/GMC Sierra 6.6 LML Duramax Diesel Replacement,Replace E05-10505 | Package and Ordering Details”

Your email address will not be published. Required fields are marked *