Description
Confirm the selected variation, quantity, package contents, current offer, and store terms before placing an order.
Product Description
We are the largest Powersports & Mower part supplier in the country. We are committed to offering an extensive selection of the finest quality replacement parts.
Compatible With John Deere:
- A3-T M Gator -Pc12542
- M-Gator A3 -Pc10887 Serial Number 110001 And Up
- Xuv Gator Utility Vehicle 625i (Gas) -Pc9957 Serial Number 110001 And Up
- Xuv Gator Utility Vehicle 825i (Gas) -Pc9958 Serial Number 110001 And Up
- Xuv Gator Utility Vehicle 855d (Diesel) -Pc9959 Serial Number 110001 And Up
- Xuv Gator Utility Vehicle -Pc11573
- Xuv Gator Utility Vehicle -Pc11574
- Xuv825e Gator Utility Vehicle -Pc13310 Not For California
- Xuv825m Gator Utility Vehicle -Pc13309 Not
- Xuv825m S4 Gator Utility Vehicle -Pc13308 Not For California
- Xuv855e Gator Utility Vehicle -Pc13313
- Xuv855m Gator Utility Vehicle -Pc13312
- Xuv855m S4 Gator Utility Vehicle -Pc13311
Ball Joint – Specifics:
| Type: | Lower or Upper Ball Joints |
| Upper Ball Joint OEM: | AM146066 |
| Item Length: | 41 mm – 1.6 in |
| Item Height: | 90.1 mm – 3.5 in |
| Ball Stud Size: | 13.8 mm – 0.5 in |
| Lower Ball Joint OEM: | AM142542, AUC12838 |
| Item Length: | 34 mm – 1.3 in |
| Item Height: | 71 mm – 2.8 in |
| Ball Stud Size: | 13.7 mm – 0.5 in |
| Item Weight: | 1.14 Lb |
| Product Specific: | With Thread / Castle nuts and snap rings |
| Material: | Metal |
| Number In pack: | 4 |
Joshua p lucas –
Exactly what I ordered and fit perfectly
Steve L. –
Shipping was fast and parts were correct.
M. Weber –
Fit my 825i perfectly. I got both sides for about 1/4 of the price of one side from Deere.
Customer –
Liked price and quality
customer –
I put these on just over a year ago. They are worn out and need to be replaced again already (visible slop and obvious camber due to the worn joint). The rubber boots are completely cracked and falling apart and the upper joints are sloppy. I will be paying the extra money for original John Deere joints this time.
David Byrd –
The lower ball joint will not fit into the control arm of a John Deere 825i. The threaded stud is too large for the hole of the original Deere control arm. I purchased these ball joints and threw them away. I ordered original ball joints from John Deere and the replacement / Installed was completed without any issues.
tijos –
C’est pièces sont mal usine de sortes que une fois installé elles entrent en contact avec le join de cardans avant et à l’arrière elles n’entrent tout simplement pas dans l’orifice.
Jamie Cole –
These are the cheapest made products from China. I purchased some others from this same supplier that were much better. These are poorly made – I will be replacing them with genuine OEM parts as soon as hunting season is over.
don mccurdy –
Quality and price of product was on opening very good fitting was fine no problems checking them on the vehicle after 6 months found the rubber covers totally perished although the joints were still ok I can’t see them lasting being exposed to the elements
Doug Smith –
Items arrived on time and appear to be a direct replacement. Installed them yesterday and they seem to have fixed my problem. Deere wanted $89 each for uppers and $86 for lowers… This price was much better.