Description
Confirm the selected variation, quantity, package contents, current offer, and store terms before placing an order.
| Color | 1 Piece-White |
|---|---|
| Brand | Newzon |
| Vehicle Service Type | SUV, Car, Pickup Truck |
| Product Dimensions | 12″L x 6″W |
| Finish Type | Polished |
| UPC | 760701353149 |
| Manufacturer | Newzon |
| Model | Bling License Plate Frame |
| Item Weight | 13.2 ounces |
| Item model number | Glitter License Plate Frame |
| Manufacturer Part Number | 1PC – Frame |
Product Description
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
Newzon Legal Choice for U
|
|
State Name Visible |
|
County Name Visible |
|
|
Lower Label Visible |
|
|
|
|
Glass Rhinestone |
|
|
|
Lastingly Bling |
|
|
|
Stainless Steel |
|
|
|
Gift Box |
|
|
|
State Name Visible |
|
County Name Visible |
||
Lower Label Visible |
||
|
|
Glass Rhinestone |
|
|
|
Lastingly Bling |
|
|
|
Stainless Steel |
|
|
|
Gift Box |
|
|
State Name Visible |
|
County Name Visible |
||
Lower Label Visible |
||
|
|
Glass Rhinestone |
|
|
|
Lastingly Bling |
|
|
|
Stainless Steel |
|
|
|
Gift Box |
|
|
|
State Name Visible |
|
County Name Visible |
|
|
Lower Label Visible |
|
|
|
|
Glass Rhinestone |
|
|
|
Lastingly Bling |
|
|
|
Stainless Steel |
|
|
|
Gift Box |
Skyelander –
EDIT: Still going strong over a year later! Definitely happy with these frames!After seeing a vehicle with this same frame driving around, I was on a mission to find where to buy it. Thankfully, I stumbled upon it here on Amazon! I scooped it up immediately and I have to say… I absolutely love the flag frames! I purchased the two pack of license plate frames. Due to my own fault, I realized the front frame will not mount on my car. My front plates mount from the bottom and this frame mounts at the top. Again, I should have paid attention to that. Luckily, my rear plate has upper mounts so this went on beautifully. The frame mounted very quickly and easily. I must say it looks even more stunning when it glistens! I wish I could capture that in a photo but it truly is better in person. So far, I have had no issues with the shine dulling or color fading.The frames came in a nice sturdy box with some mounting hardware as seen in the pictures. The screws that came with the plate would not fit in the mount holes that my vehicle had so I reused my old screws. There are also some nice “screw caps” that you can mount on the enclosed screws assuming those screws fit your vehicle. That really didn’t bother me though. I also appreciated that the company included some additional rhinestones should any of them pop off. I wasn’t sure how this would hold up because I wash my car very regularly at a wash that uses brushes. I have had this frame a few months now and everything is mounted nice and strong. No issues what so ever! I highly recommend this frame!
Flatlander –
Wife loves her Bling License Plate Frame on her 2020 Cadillac XT5! Installation was a breeze. My only issue was the license plate screws. It turns out that the screws that were previously used were hex head course thread bolts. so with a little doctoring up got them to work. If you find yourself doing the same, be aware that the top surface of the screw/bolt needs to be below the edge of the plastic part so that the bling screw caps will snap in place.As for the Start/Stop button bling ring, it works find with with our car. The issue I believe to be the problem is cars with keys with integral chip mounted on them that transpond to the cars security system near the ignition switch itself thus not allowing the ignition to see the transponder signal. So saying that, it’s not recommended for these cars. You can try it, but if you have issues of the cars not starting, simply remove the bling ring and you’re good to go.
John and Bonnie Little –
The license plate frame is really pretty and very easy to install. The frame for the start button is really nice as well. I like the coasters for the cupholders, but I recommend you use a little bit of double sided sticky tape on the bottom, because they tend to cling to the bottom of cups when I pick them up. Once I stuck them to the bottom of the cupholders, they work great and are very pretty. The little crystals in the cupholder seem to be well embedded into the rubber and none of them have come off at this point. I would definitely buy these again.
Ms C –
So after getting my white car I decided I wanted to bling everything out including my license plate so I purchased this item and when I tell you it was so cute when I saw it it did not look fake or plastic or anything even though it was but it looks so pretty once I installed it over my license plate and it has these little covers that goes over the screws which I thought was so cute so yeah this is worth the purchase so yeah this is worth the purchase
lovevintagejewels –
Ordered this plate frame in white 18 months ago and it still looks great! The only exception is of one of the screw caps falling off (probably happened at the car wash). One note is that I really didn’t need or use the car cup holders or ignition ring and would have preferred to have extra screw caps. I just purchased another car and came back to Newzon to purchase the black rhinestone version but am disappointed to find it’s no longer available. I could order another white but I’m really wanting the black rhinestone version for this particular car. I’m going to try reaching out to see if it might possibly be coming back into stock soon since I really like this brand and highly recommend it!
Tracey Lee Melodia –
This license plate cover is beautiful. The only critique I would have would be for the seller to not include the coasters and the ring for your engine. Start stop. The reason I say this is due to the fact that the coasters are very small, therefore moisture can get around them, and the start stop for newer cars. This does not necessarily fit, for instance, my start stop button in my vehicle is not out in the open and kind of tucked up under, and I cannot even fit this item around it.
Heather sturkie –
I love this for my van I absolutely love it it’s gorgeous SO sparkly!! The BEST!!!!!
Mariela Martinez –
Why did you pick this product vs others?:These sparkly plate covers are so cute, they go perfect with my Kia Carnival. They are super easy to install and they still look great even months later.